Wirsbo TruFLOW Manifold, 10-loop S&R

Wirsbo A2611000 TruFLOW Manifold, 10-loop S&R

Note: This manifold requires 20 Loop Fitting Assemblies (please see below).

Wirsbo TrueFLOW Manifold without Flow/Temperature Meters come fully assembled ready for installation. The TruFLOW balancing Hex Key is used on the internal balancing valves of the supply manifold to balance the loops across the manifold. Manifold is shipped with the appropriate number of Actuator Adapters (A2630028). Maximum recommended flow to the manifold based on manifold body diameter is 21.0 gpm.
Note: The Flow Meters (A2640015 and A2640027) are purchased separately and installed on the return manifold.

This manifold requires (20) Loop Fitting Assemblies

PEX Loop Fitting Assemblies Options

PEX Compression Loop Fitting Assemblies

• A4020313: 5/16″ PEX to R20 Loop Fitting Assembly
  This fitting will connect 5/16″ PEX to a loop of the TruFLOW Manifold without requiring the use of a PEX Tool.
• A4020375: 3/8″ PEX to R20 Loop Fitting Assembly
  This fitting will connect 3/8″ PEX to a loop of the Manifold without requiring the use of a PEX Tool.
• A4020500: 1/2″ PEX to R20 Loop Fitting Assembly
  This fitting will connect 1/2″ PEX to a loop of the Manifold without requiring the use of a PEX Tool.
• A4020625: 5/8″ PEX to R20 Loop Fitting Assembly
  This fitting will connect 5/8″ PEX to a loop of the Manifold without requiring the use of a PEX Tool.
• D4120500: 1/2″ PEX-AL-PEX to R20 Loop Fitting Assembly
  This fitting will connect 1/2″ PEX-AL-PEX to a loop of the Manifold without requiring the use of a PEX Tool.

Optional Installation Accessories

Loop End Cap

• A2080020: Manifold Loop End Cap
  These allow you to cap off a loop of the manifold if it will not be used.

TruFLOW Supply/Return Ball Valves

• A2631250: TruFLOW Supply/Return Ball Valves (box of 2)
  These allow you to quickly shut-off the supply and return sides of the manifold. These valves are R32 thread x R32 thread. The supply and return ends of the manifold is R32.

TruFLOW Supply/Return Adapters

• TruFLOW Supply/Return Adapters
  These allow you to connect the TruFLOW Manifold to your supply and return lines. The supply and return end of the manifold is R32 thread. Choose an R32 adapter that will connect the manifold to your desired application.

Actuators

• A3010522: Thermal Actuator (4 Wire)
  If you want to use your manifold to heat multiple zones, you can purchase return side actuators that work along side thermostats. The actuators act as zone valves to allow you to use one manifold to control the temperature in different rooms independently.

UPC: 673372134019